Introduction:
It is a kind of spare parts which are often applied to seal the oil, the other name of oil seal is swivel bearing lip-type packing.
As we know that there is some oil would go-in the rubbing parts of the machine usually and in order to resistant against this oil we need to use the oil seal to seal the gap of the machine. More than that, we have to concern to how to seal the water, chemical liquid and the dust, all of these environment calls for the oil seal.

Usage and Advantage:
1. Oil seal mainly used in sealing the lubricant. It's normally fixed to the load, especially the rotary bearing in order to isolate the oil cylinder from outside.
2. Oil seal can both seal inside oil and resist outside dust.
3. Most of the metal case of oil seal have a grinded outside diameter. For some large thermal expansion housing especially for aluminum and magnesium, the outside diameter is covered in rubber.

Note:
1. Models and Logos can be Customized according to your Requirement
2.we can produce according your drawings and samples.

Technical Parameters:

• Dia. range of stern shaft: 50-1150mm
• Dia. of wearproof liner of stern shafts: 70-1250mm
• Lubrication oil working pressure: 1-2bar
• Lubrication oil working temperature: -25°c~+110°c
• Line speed of stern shaft wearproof liner: ≤7m/sec
• Average leakage: 5~30ml/h

Application:

It can be applied to kinds of vessels whose working medium is oil.

Order Instructions:

1. Loaded draft
2. Stern shaft center line height from the base line
3. Stern shaft rotation speed 
4. Stern shaft dia.
5. Navigation area
6. Variety and quality of spare parts
7. Other requirements

keywords: shaft seal | mechanical seal  |  propeller shaft seal